ExtremeWireless (Aerohive)

 Is that any tutorial about hive, mesh and cli troubleshooting?

Jump to Best Answer
zlinuxboy's profile image
zlinuxboy posted 03-07-2021 03:12

I am engage in aerohive’s wlan solution. would like to apply them on our corp. I wouder how to troubleshooting hive, mesh , client roaming between APs. is that any tutorial to explain their principle and the different of cli command, such as

  • show amrp dnxp neighbor
  • show hive <string> neighor

etc.

Sam Pirok's profile image
Sam Pirok

Hello, this guide reviews some CLI commands to troubleshoot Mesh setups: https://extremeportal.force.com/ExtrArticleDetail?an=000056710&q=Troubleshooting%20Mesh%20HIveOS

This page has links to our CLI guides so you can find descriptions for any CLI command you want to run, depending on the HIveOS version and hardware model you’re working with: https://docs.aerohive.com/330000/docs/help/english/ng/Content/reference/docs/cli-reference-guides.htm

zlinuxboy's profile image
zlinuxboy

hmm, it’s not enough. Beside the cli guide, I also want to learn how hive/mesh works.

Sam Pirok's profile image
Sam Pirok

This guide provides more information on how Mesh is set up: https://extremeportal.force.com/ExtrArticleDetail?an=000083778&q=Mesh%20set%20up%20XIQ

Lueilwitz's profile image
Lueilwitz

  Thanks for the information, I will try to figure it out for more. Keep sharing such informative post keep suggesting such post.   

    

zlinuxboy's profile image
zlinuxboy

thanks